But it’s your software telling me I can no longer use an application that runs just fine under Win 10 Attachments: Up to 10 attachments including images can be used with a maximum of 3.

So the MS update of or later forcing users to update their virtual software is the same as saying if you want to update Windows you can no longer use any virtual machines on your old hardware!

Its the other way around. The burden of support for windows is on VMWare. Id try asking for help in their forums. Obviously, MS is checking on something about this 3rd party software in some way I need to read more about it BUT likely would be something I’d have to pay for as well.

Sorry, but you have it backwards. Application developers certify their programs with windows. As to servicing channels you can read more here. See link I added further below. VMWare This incompatibility is caused by Hyper-V because virtualization extensions are not exposed to type 2 hypervisors installed on a Windows machine where the Hyper-V role is enabled. VMware Workstation and Hyper-V are not compatible. The error occurs when automatic Windows updates are enabled.

With the updates Windows 10 v and the appropriate Windows Server versions starting from Windows Server , some new Hyper-V-related features are installed and enabled automatically without Windows user consent.

These features are Device Guard and Credential Guard. Windows updates known vulnerabilities but can add issues and destroy a working configuration. Device Guard is a group of security features in Windows.

The idea of implementing this feature is to harden the execution of malicious code. Credential Guard is a feature to minimize the impact of attacks if malicious code is already running by isolating system and user secrets to make more difficult to compromising.

Virtual Secure Mode VSM is a feature to leverage processor virtualization extensions that secures data in an isolated region of memory. HVCI is Hypervisor-protected code integrity. The Hyper-V role is required to make these features work Hyper-V management tools are not needed. The hypervisor Hyper-V loads first, and then the operating system Windows loads. Hyper-V provides an abstraction layer between hardware and the operating system.

A VSM allows the tagging of specific critical processes and memory used by them as they belong to a separate independent operating system controlled by Hyper-V. The principle is similar to the isolation of two VMs running on a Hyper-V host when each VM can use only the hardware resources provisioned to it.

A System Information window opens. On the following screenshot, you see that Hyper-V is enabled a hypervisor has been detected , and Device Guard Virtualization-based security is running.

Now you can remove these features. You should be aware that the following Hyper-V related features will not be available after you remove Hyper-V:. Hit Next at each step to continue. Restart is required to finish removing the Hyper-V role.

The idea behind this method is to edit boot configuration data and disable booting of Hyper-V without uninstalling the Hyper-V role. Log in to PowerShell as Administrator, or run the command from an elevated command prompt to disable Hyper-V:. For more control and convenience, disable fast boot in Windows You need to fulfill the following system requirements by downloading and installing required software versions for VMWare Workstation and Hyper-V to co-exist at the same time on the same host and run them together in parallel:.

Note: VMWare has released Workstation Previous Next.

Vmware workstation and hyper-v are not compatible windows 10 free download

 
This issue occurs because Hyper-V is incompatible with Workstation Pro or Workstation Player. With the release of VMware Workstation/Player , we are very excited and proud to announce support for Windows hosts with Hyper-V mode.

How to Use VMWare under Windows 10 and Later versions? – Microsoft Q&A

I reinstalled build full updated , installed only VMware and it worked just fine. I then ran the upgrade to the again and just received the same error, even when I have not enabled Hyper-V at all. I sent this issue using the Feedback Hub app, but I would like to find a workaround while another build is released. Blog Twitter. I’ve got the same issue I’m using a Surface Pro 3, which doesn’t allow me to disable the virtualization support any way.

What devices are you guys using? The issue might me related to Surface, but I’m not sure Sounds great! It was also with Have you checked in Services that there’s no Hyper-V related services running? I suppose you agree that this is a bug, but, just like any other bug, it doesn’t reproduce on all environments.

I have a Gigabyte ZX – Gaming 3. Should be a bug and seems difficult to reproduce it. I just did a clean install and Windows shows Hyper-V Platform cannot be installed, like the second screenshot I showed.

Seems like Microsoft is not aware or doesn’t care yet of this issue; after all, Hyper-V works fine. Today i recived an update to Build Just powered up the VMWare and it seems to run without any problems, so maybe they fixed the issue in that build.

I recently upgraded my desktop from Win 10 ver Enterprise x64 to the anniversary update ver Prior to the upgrade VMware Workstation v. After the upgrade I am now getting this error. I have a second machine Dell Latitude E which was a clean-install of Windows 10 x 64 Enterprise ver.

So it appears to be related to the upgrade process. There were some complaints by VMware but it did run. Tried one of my Win 10 x64 VM’s and could not get it to run From an Admin Command Prompt try the following to turn hypervisor on and off:. That part is spot on, but resetting it to auto is only going to cause the same error again for users.

Here I am, more than half a year after last post having this same problem. Finally found the cause and work around in this post. Hope it helps. This worked for me. It also says my Docker won’t work.

I haven’t tried it yet. Why apps in cannot play well together is beyond me. Hope this helps someone else! None of this fixed it for me. Actualy is not like chooping your foot of. Not sure how this fit on Home edition of the OS. As a curiosity, you will still find some Hyper-V flags as enabled yes value on same page, but having Virtualization-based Security disabled will do the trick.

If you are using the basic Window 10 HOME updated to the latest build level, VMware will not function, because some elements of Hyper-V are included, although they cannot be controlled. In addition, many of the functions available in bcdedit and Powershell are not available with Windows 10 Home. For example, in Powershell, none of the vm cmdlts are available. The Microsoft site solutions will not work. Even the so-called “Hypervisor readiness” do not run. There is only a generic tickbox for “Windows Hypervisor Platform”.

Reboot again. VMware will then function. It is strange but interesting that “Core Isolation” also has an effect on some system drivers. But everything returns to normal when Core Isolation is deactivated. Office Office Exchange Server. Not an IT pro? Internet Explorer TechCenter.

Sign in. United States English. Ask a question. Quick access. Search related threads. Remove From My Forums. Asked by:. Archived Forums. Windows 10 Insider Preview Builds. Sign in to vote. What can I do? Update: I tried with the build and got the same issue. Wednesday, March 30, AM. Hi Sergio and i thought i would be the only one with this problem. I have exactly the same problem which is really annoying because there seems no way to fix it.

Wednesday, March 30, PM. Hi Sergio, I’ve got the same issue I’m using a desktop PC. I think the workaround would be installing this build and then VMware Workstation. Thursday, March 31, AM. Please share your findings Peter Selch Dahl – www. Peter: I think there is not way to workaround this issue once you get it.

Thursday, March 31, PM. The only way it worked was installing Hyper-V from and then upgrade to I’ve been having a similar problem for a few builds now. Hyper-V is installed, probably triggered by the Visual Studio install.

The Hyper-V services are all stopped, and I have set the hypervisorlaunchtype to off in bcdedit which is all I needed to do previously. Something has clearly changed. Anyone else find a workaround? Saturday, April 2, AM. I could workaround this, but only could use Hyper-V. Just installed it using PowerShell and it worked. I will try VMware in the next build. Monday, April 4, PM. Hi Sergio, did you tried it with the new build already?

Wednesday, April 6, PM. Just tried. Same issue. We will have to wait until VMWare itself reports the issue with these latest builds. Hi Sergio, i left the insider preview programm due to that bug. Sunday, April 10, AM. Sergio, I recently upgraded my desktop from Win 10 ver Enterprise x64 to the anniversary update ver Wednesday, August 10, PM. Paul 0. I have exactly the same problem. I bounce back and forth a few times per year between Hyper-V and VMWare Workstation to try and stay fluent in both as I encounter both with my customers.